User's Manual

37
EN
If the selected AP requires the password 4. authentication,
you will enter its setting screen.
Use the Direction Button to select the text and press 5.
the [OK] Button to confirm it.
Field Description
Capital letters
Lower case letters
Numbers, symbols
When the setting is done, select 7. the [Confirm] icon (
) to validate the password and connect to the
AP.
Or press the [Playback] Button/ select the 8. Return icon
(
) to exit.
The screen shown [CONNECTION OK] indicates the 9.
connection is established.
When the connection is 10. established, the signal strength
will show on the top of the screen.
The screen shown [CONNECTION FAILED] indicates 11.
the camcorder does not connect to the AP.
Note
This camcorder only supports the AP(SSID) named in English/number/symbols (ASCII •
characters).
The possible reasons for “CONNECTION FAILED” could be (1) wrong password ; (2) you •
are not in the wireless network area of the AP. (3) the camcorder does not support the type
of encryption used on the AP. This model only supports WEP/WPA/WPA2 personal type of
encryption, but not up to enterprise level (4)your network requires PPPoE account/password
information.
You can only enter text in English, regardless of the OSD language.•