User's Guide

5
TOSHIBA Wireless UWB Port Replicator Users Guide
Revision 0.1,
2.1 Installing the Driver
NOTE: From a driver perspective, the Wireless USB Hub represents two separate and unique USB devices. At least two drivers
must be installed on the PC. The installed driver is tied to a PC’s particular USB port, so you will need to install the drivers for
each port where the Wireless USB Hub might be installed.
2.2 Installing the USB Drivers and the EVK Control Center (ECC)
Step 1
From the CD, run the SetupSSP-toshiba.exe.
Once the file is executed the user is prompted to select a language option as shown in Figure 1 - Select Setup Language. Click
“OK” once a language for the installer has been selected.