User's Guide

13
TOSHIBA Wireless UWB Port Replicator Users Guide
Revision 0.1,
Figure 16 – Target Menu
3.2.1 Select the Device Identifier (Address) and Time Frequency Code #
EVK Control center supports changing the Device Identifier and Time Frequency Code (TFC#). Select Target -> Properties from
the main window to see current setting and to change it.
By default, most units are configured with a device identifier of “café" and a TFC of 6. To change the TFC, type in the desired
value and click apply. (Note: TFCs 1 through 7 are supported. The Device Identifier is a four digit hexadecimal number.) Click
the “X” button to close the Device Settings window.
Figure 17 - Device Settings, TFC, Device Identifier