User's Manual

User’s Manual 2-11
The Grand Tour
Operation buttons
This section describes the operation buttons.
System indicators
LEDs above icons, light when various computer operations are in progress.
Figure 2-7 System indicators
Please do not press the buttons too strenuously.
Application 1 This button allows you to run applications and
access utilities. An application and a function to
assign can be configured individually.
When the computer is switched off, or is in
standby or hibernation mode, press this button to
start the computer and launch the assigned
application.
This button settings can be changed only by
administrator.
Application 2 This button allows you to run applications and
access utilities. An application and a function to
assign can be configured individually.
When the computer is switched off, or is in
standby or hibernation mode, press this button to
start the computer and launch the assigned
application.
This button settings can be changed only by
administrator.
Bridge Media The Bridge Media indicator glows green when
the computer is accessing the Bridge media slot.
DC IN The DC IN indicator glows green when DC power
is supplied from the AC power adaptor. If the
adaptor’s output voltage is abnormal or if the
power supply malfunctions, this indicator flashes
orange.