User's Manual

User’s Manual 7-11
HW Setup & BIOS Setup
Diagnostic Mode
Set whether the BIOS Setup Diagnostic test is enabled.
System configuration changes other than changes to this setting
should be made in Windows using TOSHIBA HW Setup, TOSHIBA
Password Utility, TOSHIBA Power Saver, Device Manager, etc.
When using TPM, please install the Infineon TPM Installation Guide
from the TOSHIBA Application Installer.
Please ensure that the user reads the Infineon TPM Installation
Guide as it contains usage information and notes on using TPM.
Disabled The Diagnostic test is disabled (Default).
Enabled The Diagnostic test is enabled.