User Manual
Table Of Contents
- Portégé® M400/M405 Series User’s Guide
- Contents
- Introduction
- Chapter 1: Getting Started
- Selecting a place to work
- Setting up your computer
- Registering your computer with Toshiba
- Setting up other devices
- Connecting to a power source
- Charging the main battery
- Using the computer for the first time
- Adding memory (optional)
- Using the TouchPad™
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a printer
- Connecting an optional external diskette drive
- Turning off the computer
- Using your computer in tablet mode
- Caring for your computer
- Chapter 2: Learning the Basics
- Chapter 3: Mobile Computing
- Chapter 4: Exploring Your Computer’s Features
- Chapter 5: Toshiba Utilities
- Fn-esse
- Toshiba Hotkey Utility
- Toshiba Assist
- Setting passwords
- PC Diagnostic Tool Utility
- HDD Protection Utility
- Toshiba Power Saver
- Toshiba SD™ Memory Card Format Utility
- Mouse Utility
- Toshiba Mobile Extension
- Toshiba Zooming Utility
- Toshiba Button Controls
- CD/DVD Drive Acoustic Silencer
- Toshiba Hardware Setup
- Tablet and Pen Settings
- Toshiba Rotation Utility
- Cross Menu Utility
- Toshiba Tablet Access Code Utility
- Toshiba SD™ Memory Boot Utility
- Trusted Platform Module (TPM)
- Fingerprint Authentication Utility
- Chapter 6: Keeping Your Files Safe
- Using passwords in the Windows ® operating system
- User-level passwords
- Setting a user-level password
- Disabling the user-level password
- Using the power-on (user-level) password
- Using the instant (user-level) password
- Using the HDD password
- Setting a hard disk drive user only password in System Setup
- Deleting or changing a hard disk drive user only password in System Setup
- Setting a hard disk drive master and user password in System Setup
- Changing the master and user passwords in System Setup
- Deleting the hard disk drive master and user passwords in the System Setup
- Using passwords in the Windows ® operating system
- Chapter 7: If Something Goes Wrong
- Appendix A: Hot Keys
- Appendix B: Power Cord/Cable Connectors
- Appendix C: Using ConfigFree™ with your Toshiba Computer
- Glossary
- Index
58
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor’s video cable to the RGB (monitor)
port on the back of the computer.
2 Connect the monitor’s power cord/cable to a live
electrical outlet.
3 Connect the device’s power cable to a live electrical
outlet.
4 Turn on the external monitor.
5 Set the display mode by pressing
Fn + F5, or by
configuring the Display Properties settings.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
Fn + F5):
1 Press
Fn and F5 simultaneously.
2 While holding down
Fn, press F5 repeatedly until the
setting you want takes effect. Briefly pause each time you
press the
F5 key to allow time for the display to change.
This hot key cycles through the settings in the following
order:
❖ Built-in display only
❖ Built-in display and external monitor simultaneously
❖ External monitor only
❖ Presentation button
3 Release the
Fn key.