User Manual
Table Of Contents
- Portégé® M400/M405 Series User’s Guide
- Contents
- Introduction
- Chapter 1: Getting Started
- Selecting a place to work
- Setting up your computer
- Registering your computer with Toshiba
- Setting up other devices
- Connecting to a power source
- Charging the main battery
- Using the computer for the first time
- Adding memory (optional)
- Using the TouchPad™
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a printer
- Connecting an optional external diskette drive
- Turning off the computer
- Using your computer in tablet mode
- Caring for your computer
- Chapter 2: Learning the Basics
- Chapter 3: Mobile Computing
- Chapter 4: Exploring Your Computer’s Features
- Chapter 5: Toshiba Utilities
- Fn-esse
- Toshiba Hotkey Utility
- Toshiba Assist
- Setting passwords
- PC Diagnostic Tool Utility
- HDD Protection Utility
- Toshiba Power Saver
- Toshiba SD™ Memory Card Format Utility
- Mouse Utility
- Toshiba Mobile Extension
- Toshiba Zooming Utility
- Toshiba Button Controls
- CD/DVD Drive Acoustic Silencer
- Toshiba Hardware Setup
- Tablet and Pen Settings
- Toshiba Rotation Utility
- Cross Menu Utility
- Toshiba Tablet Access Code Utility
- Toshiba SD™ Memory Boot Utility
- Trusted Platform Module (TPM)
- Fingerprint Authentication Utility
- Chapter 6: Keeping Your Files Safe
- Using passwords in the Windows ® operating system
- User-level passwords
- Setting a user-level password
- Disabling the user-level password
- Using the power-on (user-level) password
- Using the instant (user-level) password
- Using the HDD password
- Setting a hard disk drive user only password in System Setup
- Deleting or changing a hard disk drive user only password in System Setup
- Setting a hard disk drive master and user password in System Setup
- Changing the master and user passwords in System Setup
- Deleting the hard disk drive master and user passwords in the System Setup
- Using passwords in the Windows ® operating system
- Chapter 7: If Something Goes Wrong
- Appendix A: Hot Keys
- Appendix B: Power Cord/Cable Connectors
- Appendix C: Using ConfigFree™ with your Toshiba Computer
- Glossary
- Index
239
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.3
Check the communications parameters (baud rate, parity, data
length and stop bits) specified in the communications
program. It should be set up to transmit at 300, 1200, 2400,
4800, 9600, 14400, 28800, 33600 bps (bits per second) or
higher. Refer to the program’s documentation and the modem
manual for information on how to change these settings.
The modem is on, set up properly and still will not
transmit or receive data.
Make sure the line has a dial tone. Connect a telephone
handset to the line to check this.
The other system may be busy or off line. Try making a test
transmission to someone else.
For more information regarding your system’s V.92 modem,
visit the Toshiba Web site at pcsupport.toshiba.com.
Wireless networking problems
This section provides general troubleshooting tips for
networking problems, specifically wireless (Wi-Fi) networking.
The terms and concepts used assume a basic understanding of
networks, and may be for more advanced users. If you need
assistance or if you are not familiar with the terminology,
please see Windows Help and Support or contact your
computer technician.
❖ If your computer is equipped with an internal Wi-Fi
adapter, verify that the Wi-Fi antenna switch is on (the
light next to the wireless antenna on/off switch will be
lit.)
NOTE