User Manual
Table Of Contents
- Portégé® M400/M405 Series User’s Guide
- Contents
- Introduction
- Chapter 1: Getting Started
- Selecting a place to work
- Setting up your computer
- Registering your computer with Toshiba
- Setting up other devices
- Connecting to a power source
- Charging the main battery
- Using the computer for the first time
- Adding memory (optional)
- Using the TouchPad™
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a printer
- Connecting an optional external diskette drive
- Turning off the computer
- Using your computer in tablet mode
- Caring for your computer
- Chapter 2: Learning the Basics
- Chapter 3: Mobile Computing
- Chapter 4: Exploring Your Computer’s Features
- Chapter 5: Toshiba Utilities
- Fn-esse
- Toshiba Hotkey Utility
- Toshiba Assist
- Setting passwords
- PC Diagnostic Tool Utility
- HDD Protection Utility
- Toshiba Power Saver
- Toshiba SD™ Memory Card Format Utility
- Mouse Utility
- Toshiba Mobile Extension
- Toshiba Zooming Utility
- Toshiba Button Controls
- CD/DVD Drive Acoustic Silencer
- Toshiba Hardware Setup
- Tablet and Pen Settings
- Toshiba Rotation Utility
- Cross Menu Utility
- Toshiba Tablet Access Code Utility
- Toshiba SD™ Memory Boot Utility
- Trusted Platform Module (TPM)
- Fingerprint Authentication Utility
- Chapter 6: Keeping Your Files Safe
- Using passwords in the Windows ® operating system
- User-level passwords
- Setting a user-level password
- Disabling the user-level password
- Using the power-on (user-level) password
- Using the instant (user-level) password
- Using the HDD password
- Setting a hard disk drive user only password in System Setup
- Deleting or changing a hard disk drive user only password in System Setup
- Setting a hard disk drive master and user password in System Setup
- Changing the master and user passwords in System Setup
- Deleting the hard disk drive master and user passwords in the System Setup
- Using passwords in the Windows ® operating system
- Chapter 7: If Something Goes Wrong
- Appendix A: Hot Keys
- Appendix B: Power Cord/Cable Connectors
- Appendix C: Using ConfigFree™ with your Toshiba Computer
- Glossary
- Index
222
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.3
If you install an older (legacy) device that the operating
system cannot recognize, the operating system may have
difficulty assigning resources to it. As a result, a hardware
conflict can occur.
Resolving conflicts
There are several things you can do to resolve hardware
conflicts:
❖ Get the most recent drivers from the manufacturer.
❖ Disable the device.
For an older device, remove it from the computer.
❖ Disable another system component and use its resources
for the new device. See “Fixing a problem with Device
Manager” on page 222.
❖ Reconfigure the device so that its requirements do not
conflict. Refer to the device’s documentation for
instructions about changing settings on the device.
Fixing a problem with Device Manager
Device Manager provides a way to check and change the
configuration of a device.
Changing the default settings using Device Manager can
cause other conflicts that make one or more devices unusable.
Device Manager is a configuration tool for advanced users
who understand configuration parameters and the
ramifications of changing them.