User Manual
Table Of Contents
- Portégé® M400/M405 Series User’s Guide
- Contents
- Introduction
- Chapter 1: Getting Started
- Selecting a place to work
- Setting up your computer
- Registering your computer with Toshiba
- Setting up other devices
- Connecting to a power source
- Charging the main battery
- Using the computer for the first time
- Adding memory (optional)
- Using the TouchPad™
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a printer
- Connecting an optional external diskette drive
- Turning off the computer
- Using your computer in tablet mode
- Caring for your computer
- Chapter 2: Learning the Basics
- Chapter 3: Mobile Computing
- Chapter 4: Exploring Your Computer’s Features
- Chapter 5: Toshiba Utilities
- Fn-esse
- Toshiba Hotkey Utility
- Toshiba Assist
- Setting passwords
- PC Diagnostic Tool Utility
- HDD Protection Utility
- Toshiba Power Saver
- Toshiba SD™ Memory Card Format Utility
- Mouse Utility
- Toshiba Mobile Extension
- Toshiba Zooming Utility
- Toshiba Button Controls
- CD/DVD Drive Acoustic Silencer
- Toshiba Hardware Setup
- Tablet and Pen Settings
- Toshiba Rotation Utility
- Cross Menu Utility
- Toshiba Tablet Access Code Utility
- Toshiba SD™ Memory Boot Utility
- Trusted Platform Module (TPM)
- Fingerprint Authentication Utility
- Chapter 6: Keeping Your Files Safe
- Using passwords in the Windows ® operating system
- User-level passwords
- Setting a user-level password
- Disabling the user-level password
- Using the power-on (user-level) password
- Using the instant (user-level) password
- Using the HDD password
- Setting a hard disk drive user only password in System Setup
- Deleting or changing a hard disk drive user only password in System Setup
- Setting a hard disk drive master and user password in System Setup
- Changing the master and user passwords in System Setup
- Deleting the hard disk drive master and user passwords in the System Setup
- Using passwords in the Windows ® operating system
- Chapter 7: If Something Goes Wrong
- Appendix A: Hot Keys
- Appendix B: Power Cord/Cable Connectors
- Appendix C: Using ConfigFree™ with your Toshiba Computer
- Glossary
- Index
192
Toshiba Utilities
Fingerprint Authentication Utility
5.375 x 8.375 ver 2.3
Power-on security can be configured to operate with the
fingerprint logon feature. If a fingerprint used for power-on
security matches a fingerprint in an existing passport, the
corresponding user is logged on automatically without having
to enter the Windows
®
logon password.
Your hardware must support Power-on security to use the
single logon feature. You must have administrative privileges
to change settings.
To enable power-on security single logon:
1 Open the Control Center and go to Settings - System
Settings.
2 Select Logon.
3 Check the Allow power-on security single sign-on
check box. (Logon support must be enabled for this
option to be accessible.)
Fingerprint Management
Fingerprints are stored in memory during enrollment. After a
fingerprint is enrolled, it is displayed with a power-on button
above it. The button appears “pressed in” by default,
indicating that the corresponding finger will be used for
power-on security. If you do not want to use a fingerprint for
power-on security but only for logon, click the Boot button to
delete the fingerprint from the fingerprint device memory.
The fingerprint device memory can typically hold up to 21
fingerprints. The number of slots remaining is displayed in
the enrollment wizard.
NOTE