User's Manual
Table Of Contents
- Portégé® M400 SeriesUser’s Guide
- Contents
- Introduction
- Chapter 1: Getting Started
- Selecting a place to work
- Setting up your computer
- Registering your computer with Toshiba
- Adding external devices
- Connecting to a power source
- Charging the main battery
- Using the computer for the first time
- Adding memory (optional)
- Connecting an external USB mouse
- Connecting an external USB keyboard
- Connecting a printer
- Connecting the modem
- Connecting to a network
- Using the TouchPad™
- Using the Cross-Functional button
- Using external display devices
- Turning off the computer
- Using your computer in tablet mode
- Caring for your computer
- Chapter 2: Learning the Basics
- Chapter 3: Mobile Computing
- Chapter 4: Exploring Your Computer’s Features
- Chapter 5: Toshiba Utilities
- Fn-esse
- Toshiba Hotkey utility
- TOSHIBA Assist
- Setting passwords
- PC Diagnostic Tool Utility
- HDD Protection Utility
- TOSHIBA Power Saver
- TOSHIBA SD™ Memory Card Format Utility
- Mouse Utility
- TOSHIBA Mobile Extension
- TOSHIBA Zooming Utility
- TOSHIBA Button Controls
- CD/DVD Drive Acoustic Silencer
- TOSHIBA Hardware Setup
- Tablet and Pen Settings
- Toshiba Rotation Utility
- Cross Menu Utility
- TOSHIBA Tablet Access Code Utility
- TOSHIBA SD™ Memory Boot Utility
- Trusted Platform Module (TPM)
- Fingerprint Authentication Utility
- Chapter 6: Keeping Your Files Safe
- Using passwords in the Windows ® operating system
- User-level passwords
- Setting a user-level password
- Disabling the user-level password
- Using the power-on (user-level) password
- Using the instant (user-level) password
- Using the HDD password
- Setting a hard disk drive user only password in System Setup
- Deleting or changing a hard disk drive user only password in System Setup
- Setting a hard disk drive master and user password in System Setup
- Changing the master and user passwords in System Setup
- Deleting the hard disk drive master and user passwords in the System Setup
- Using passwords in the Windows ® operating system
- Chapter 7: If Something Goes Wrong
- Problems that are easy to fix
- Problems when you turn on the computer
- The Windows ® operating system is not working
- Resolving a hardware conflict
- A plan of action
- Resolving hardware conflicts on your own
- Fixing a problem with Device Manager
- Power and the batteries
- Keyboard problems
- Display problems
- Disk drive problems
- CD-RW/DVD-ROM or multi-function drive problems
- Sound system problems
- PC Card problems
- Printer problems
- Modem problems
- Wireless networking problems
- DVD operating problems
- Develop good computing habits
- If you need further assistance
- Other Toshiba Internet Web sites
- Toshiba’s worldwide offices
- Appendix A: Hot Keys
- Appendix B: Power Cord/Cable Connectors
- Appendix C: Using ConfigFree™ with your Toshiba Computer
- Glossary
- Index
63
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
TECHNICAL NOTE: In order to use the simultaneous mode,
you must set the resolution of the internal display panel to
match the resolution of the external display device. The
external display device must support a resolution of 800 X 600
or higher.
If you have your internal display set to horizontal landscape
and then rotate the internal display to a portrait style, images
will not display properly on an external display or other exter-
nal device (for example, a projector) unless you change the
internal device’s setting to primary landscape. This is a techni-
cal restriction.
When the display is rotated, the display orientation on the
external display will also rotate.
Display limitations
Keep in mind that the quality of the display will be limited to
the capabilities of the external video device.
❖ If the external video device, such as an SVGA monitor, is
capable of displaying at a maximum resolution of 800 x
600 and your system is set for a higher resolution, only
part of the desktop will appear on the screen. You can
view the “lost” area by scrolling to it.
❖ If you use the display hot key (Fn + F5) to change the
display output with the LCD Display Stretch option
enabled and the Display area (resolution) set to
800 x 600, the image on the internal display panel may
appear stretched.