User's Manual
Table Of Contents
- Portégé® M400 SeriesUser’s Guide
- Contents
- Introduction
- Chapter 1: Getting Started
- Selecting a place to work
- Setting up your computer
- Registering your computer with Toshiba
- Adding external devices
- Connecting to a power source
- Charging the main battery
- Using the computer for the first time
- Adding memory (optional)
- Connecting an external USB mouse
- Connecting an external USB keyboard
- Connecting a printer
- Connecting the modem
- Connecting to a network
- Using the TouchPad™
- Using the Cross-Functional button
- Using external display devices
- Turning off the computer
- Using your computer in tablet mode
- Caring for your computer
- Chapter 2: Learning the Basics
- Chapter 3: Mobile Computing
- Chapter 4: Exploring Your Computer’s Features
- Chapter 5: Toshiba Utilities
- Fn-esse
- Toshiba Hotkey utility
- TOSHIBA Assist
- Setting passwords
- PC Diagnostic Tool Utility
- HDD Protection Utility
- TOSHIBA Power Saver
- TOSHIBA SD™ Memory Card Format Utility
- Mouse Utility
- TOSHIBA Mobile Extension
- TOSHIBA Zooming Utility
- TOSHIBA Button Controls
- CD/DVD Drive Acoustic Silencer
- TOSHIBA Hardware Setup
- Tablet and Pen Settings
- Toshiba Rotation Utility
- Cross Menu Utility
- TOSHIBA Tablet Access Code Utility
- TOSHIBA SD™ Memory Boot Utility
- Trusted Platform Module (TPM)
- Fingerprint Authentication Utility
- Chapter 6: Keeping Your Files Safe
- Using passwords in the Windows ® operating system
- User-level passwords
- Setting a user-level password
- Disabling the user-level password
- Using the power-on (user-level) password
- Using the instant (user-level) password
- Using the HDD password
- Setting a hard disk drive user only password in System Setup
- Deleting or changing a hard disk drive user only password in System Setup
- Setting a hard disk drive master and user password in System Setup
- Changing the master and user passwords in System Setup
- Deleting the hard disk drive master and user passwords in the System Setup
- Using passwords in the Windows ® operating system
- Chapter 7: If Something Goes Wrong
- Problems that are easy to fix
- Problems when you turn on the computer
- The Windows ® operating system is not working
- Resolving a hardware conflict
- A plan of action
- Resolving hardware conflicts on your own
- Fixing a problem with Device Manager
- Power and the batteries
- Keyboard problems
- Display problems
- Disk drive problems
- CD-RW/DVD-ROM or multi-function drive problems
- Sound system problems
- PC Card problems
- Printer problems
- Modem problems
- Wireless networking problems
- DVD operating problems
- Develop good computing habits
- If you need further assistance
- Other Toshiba Internet Web sites
- Toshiba’s worldwide offices
- Appendix A: Hot Keys
- Appendix B: Power Cord/Cable Connectors
- Appendix C: Using ConfigFree™ with your Toshiba Computer
- Glossary
- Index
50
Getting Started
Charging the main battery
5.375 x 8.375 ver 2.3
❖ Is unlit when the main battery has discharged, the battery
is not charging, or the AC adapter is not plugged into the
computer or AC outlet
❖ Flashes amber when the main battery charge is low and it
is time to recharge the main battery or plug in the AC
adapter
If the AC power light flashes amber during charging,
either the main battery is malfunctioning, or it is not
receiving correct input from the AC power supply.
Disconnect the AC power cord/cable and remove the main
battery pack. See “Changing the main battery” on page 111 for
information on replacing the main battery.
Charging the main battery
Your computer came with its main battery already installed.
Before using the battery to power the computer, you must
charge the battery.
To charge the main battery, leave the computer plugged into
an AC power source for at least three hours with the computer
turned off. After that, the battery will be completely charged
and ready to power the computer.
TECHNICAL NOTE: The RTC battery does not charge while the
computer is turned off, even when AC power is attached.
The RTC battery charges when the computer is powered on.
For more information about installing or removing the main
battery, see “Changing the main battery” on page 111.
NOTE