User Manual

28
VPN Client: VZAccess Manager automatically detects if certain VPN clients like Microsoft, Cisco,
CheckPoint, etc are installed on the compuuter and allows you to select the one you wish to use.
Check with your network administrator to setup your VPN connection.
If the VPN client you wish to use does not appear in the list, you can select Other VPN
Application
Other VPN Application:
This allows automatically running any VPN program when you use
VZAccess Manager to connect to the Wi-Fi network you added or edited. Select the browse
button
to browse to the desired VPN application you want to run when you connect to the Wi-Fi
network you added or edited, using VZAccess Manager.
If you have a shortcut you normally use
to launch your VPN application you may want to right click on it and select properties to see
where the program is located and how it's named.
Option Tab
The last tab in Preferences that has Wi-Fi specific settings is the Options tab ("Options",
"Preferences", "Options"):
Only show preferred wireless networks at start up: This only applies to Wi-Fi networks. If
checked, at startup, only networks in your Preferred list on the Wi-Fi tab are displayed (networks
you have connected to in the past) otherwise, all detected networks are displayed. You also have
the option in the main screen of VZAccess Manager of selecting "Show All
Networks" when only preferred networks are displayed and you have the option to select "Show
Preferred" networks when VZAccess Manager is set to show all detected networks.
Display advanced Wi-Fi network information: This only applies to Wi-Fi networks. If checked,
additional information will be displayed for Wi-Fi networks such as the channel, MAC address and
type of security.
The rest of the features on this tab are explained in the section on Setting Your Preferences.
4.4 TXT MESSAGING SETTINGS
The following options are available for PC Cards only that support TXT Messaging.
TXT Messaging Preferences
Click on "Tools", then "Preferences. . . ".