User Manual

Show wireless device battery instead of PC battery: If you only selected to detect and install

Wi-Fi when installing VZAccess Manager, VZAccess Manager will display the PC's battery status in

it's main window. If you are using a WWAN device and this option is selected, the battery level of

your WWAN device will be displayed when your device is connected and detected by VZAccess

Manager, as well as when you connect and disconnect using your WWAN device. Battery

Status cannot be updated while you are connected. You can refresh the status when you are not

connected, by selecting "Tools", "Refresh Signal Levels" from VZAccess Manager's main window.

Some phones fail to accurately report their battery level to VZAccess Manager and some WWAN

devices such as PC Cards do not use batteries, so you can use this option to display the PC's

battery instead.

Set Options . . . : This is used to set various connect options. See below.

Automatically Connect: If desired, you can select to have VZAccess Manager automatically

connect to Verizon Wireless

NationalAccess - BroadbandAccess or NationalAccess at application startup.

Show non-wireless accounts in list: If you select this option all of your dial up accounts will

show up in VZAccess

Manager's list of accounts, allowing you to use VZAccess Manager to launch them instead of Dial-

Up Networking. With this option unchecked, the only connections that are displayed in VZAccess

Manager's list of accounts, are the Verizon Wireless NationalAccess - BroadbandAccess,

NationalAccess or Quick 2 Net (14.4 kbps) connection, (depending on your wireless phone/device

capabilities) and any Wireless connections you have created, manually or with the Copy Accounts

Wizard. If VZAccess Manager is also configured for Wi-Fi, these connections will also be displayed

when in coverage of the hot spot.

Do not prompt for user name and password: If you are only using the Verizon Wireless

NationalAccess -

BroadbandAccess, NationalAccess or Quick 2 Net (14.4 kbps) connection, this setting has no

effect. If you created