User's Manual

User’s Manual 8-15
Optional Devices
Right side and Back side
The following figure shows the libretto DVD Dock's right and back side.
Figure 8-12 Right and back side the libretto DVD Dock
Connecting the libretto DVD Dock
Follow the steps below to connect the computer to the libretto DVD Dock.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Place the computer on the libretto DVD Dock so that the Docking holes
of the front-side of the computer are aligned with the libretto DVD
Dock's Front Latches.
Undock switch
Docking LED
Lock lever
Lock lever Rotating this will lock the libretto DVD Dock
connected to the computer so that it cannot be
removed.
Undock switch Slide this to eject the computer. Slide to the left to
eject.
Docking LED This indicator is lit up when the libretto DVD Dock
is connected to the computer. When the eject
operation is carried out, check that this indicator
is not lit before removing it.
Before you connect the libretto DVD Dock, make sure you turn off the
computer and disconnect the AC Adaptor and any other external devices.