User's Manual

4-10 User’s Manual
Operating Basics
Using optical media drives
The text and illustrations in this section refer primarily to the optional media
drive. However, operation is the same for all other optical media drives.
The full-size drive provides high-performance execution of CD/DVD-ROM-
based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/
DVDs without an adaptor. An ATAPI interface controller is used for CD/
DVD-ROM operation. When the computer is accessing a CD/DVD-ROM,
an indicator on the drive glows. For detailed information, refer to Chapter 8,
libretto DVD Dock.
If you have a DVD-ROM&CD-R/RW drive, refer also to the Writing CDs on
DVD-ROM&CD-R/RW drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs.
■ The optical media drive is optional.
■ The optical media drive can be used by connecting libretto DVD Dock
to this computer.
■ Please ensure that it is used on a flat surface such as a table when a
CD/DVD is used to connect to the libretto DVD Dock. If used when
placed on an unstable location or if strong vibrations shake it during
operation, the CD/DVD might be scratched and the drive might be
damaged.
Use the WinDVD application to view DVD-Video discs.
When playing DVD-Video, always connect the AC adaptor to ensure
maximum performance. Operation on battery power might result in skipped
frames.