User's Manual

User’s Manual 3-15
Getting Started
4. Insert the (first) blank media into the tray of the Optical Drive.
5. Double click the Recovery Disc Creator Launcher icon on the Windows
XP desktop, or Select the application from start Menu.
6. After Recovery Disc Creator starts, select the type of media and the title
you wish to copy to the media then click the Burn button.
Restoring the preinstalled software from the
Recovery HDD
About 2GB of hard disk space is reserved for recovery partition.
When re-setting up your hard disk, do not change, delete or add partitions
in a manner other than specified in the manual. Otherwise, space for
software may be destroyed.
In addition, if you use a third-party partitioning program to reconfigure
partitions on your hard disk, it may become impossible to re-setup your
computer.
1. Turn off your computer.
2. While holding down 0 (zero) key on the keyboard, turn on your
computer.
3. A menu appears. Press the "1" key on the keyboard to restore the
original configuration as purchased. Press the "2" key to keep your
current partitions intact and restore. Press the "3" key to specify
partitions and restore.
4. Follow the on-screen instructions.
■ If your Optical Drive can only write to CDs, select "CD" as the "Type"
on Recovery Disc Creator. If your Optical Drive of your computer can
write to either CD or DVDs, select the one you are using as the "Type"
on Recovery Disc Creator.
■ You can also create Recovery CD of Express Media Player using
Recovery Disc Creator.
When creating Recovery CD of the Express Media Player, it recommends
creating using the libretto DVD Dock.
When re-setting up the Express Media Player, it recommends using the
libretto DVD Dock.