User's Manual

User’s Manual 4-39
Operating Basics
Using the Hard Disk Drive (HDD) Protection
There is a function for reducing the risk of damage on HDD in this
computer.
Using the acceleration sensor built in the computer, HDD Protection
detects vibration, shocks and similar signs in the computer, and
automatically moves the HDD head to a safe position in order to reduce the
risk of damage that could be caused by a head-to-disk contact.
When vibration is detected, the following message is displayed, and the
icon in the notification area of the taskbar is changed to the protection
state. This message is displayed until the OK button is pressed or 30
seconds pass. When vibration subsides, the icon returns to the normal
state.
Figure 4-16 HDD Protection Message
Taskbar Icon
■ This function does not guarantee that the HDD will not be damaged.
■ The external hard disk drive is not supported by the HDD protection
function.
State Icon Description
Normal HDD Protection is enabled.
Protection HDD Protection is active. The HDD head is
at a safe position.
OFF HDD Protection is disabled.