User's Manual

Using Intel(R)PROSet/Wireless Profiles
Note:
A password protected profile can be imported and exported, however, before editing the profile, the password must be entered. Refer to
Setting a Profile Password for more
information.
Export Profiles
To export profiles from your profile list:
1. From the Intel PROSet/Wireless main window, click Import/Export on the Profiles menu.
2. Select the profile or profiles from the list,
3. Specify the destination folder on your hard drive. You can use the Browse button to navigate to a folder.
4. Click OK after the profiles have been successfully exported.
5. Click Close to close Intel PROSet/Wireless main window.
Import profiles
To add profiles to your profile list:
1. From the Intel PROSet/Wireless main window, click Import/Export on the Profiles menu.
2. Click Import.
3. Locate the profile to import on your computer or enter the profile name in the file name field. The profile extension is either .profiles or .p50. The profiles to import can be located
in any directory you choose on your computer.
4. Click Import to import the profile into the profile list.
5. Click Close to return to the Intel PROSet/Wireless main window. The imported profile is displayed in the profile list and is ready to use.
Setting a Profile Password
Note:
A password protected profile can be imported and exported; however, before editing the profile, the password must be entered.
To set a password for an existing profile:
1. From the Intel PROSet/Wireless main window, click Properties. The General Settings page is displayed.
2. Click Advanced.
3. Click Password protect this profile.
4. Password: Type the password.
5. Confirm Password: Re-type the password.
6. Click OK to save the setting and return to the General Settings page.
7. Click OK. The Intel PROSet/Wireless main window is displayed.
file:///C|/CX2%20Muroc%20UG/6-15-04/profiles.htm (7 of 10) [6/15/2004 3:40:11 PM]