User's Manual

Using Intel(R)PROSet/Wireless Profiles
7. Select the Network Authentication and Data Encryption options. Enter the encryption key settings and configure the 802.1x settings as
required. Refer to
Security Settings for more information.
8. Click OK when you have completed the profile settings. The Profile Wizard ends and you are returned to Intel PROSet/Wireless main window.
To change or verify the profile settings, click the Back button.
9. If you are not currently connected to a network, Intel PROSet/Wireless detects that a new profile has been added and automatically attempts
to connect to this new profile.
10. If you want to manually connect to this profile, click Connect to use this wireless network. The
connection icon displays the current connection
status. The network name, transmit and receive speed, and signal quality are also displayed.
Editing an Existing Profile
To edit an existing profile:
1. Select the profile to edit from the Profiles List.
2. Click Properties. The General Settings and Security Settings pages display all of the profile settings and parameters that can be modified.
3. Click Next and Back to navigate through the General and Security Setting settings.
● General Settings. Refer to General Settings for more information.
● Security Settings. Refer to Security Settings for more information.
Removing a Profile
To remove a profile:
1. Select the profile to be removed from the Profiles List.
2. Click Remove to delete the profile.
NOTE:
You cannot delete all profiles from the Profiles List. There must always be one profile displayed in the list.
Importing and Exporting Profiles
file:///C|/CX2%20Muroc%20UG/6-15-04/profiles.htm (6 of 10) [6/15/2004 3:40:11 PM]