User's Manual

Using Intel(R)PROSet/Wireless Profiles
2. Click Next to display the Profile Wizard Security Settings page. This starts the access point query process to determine the highest level of
security required for the selected network. Refer to
Setting up Security for more information on security options.
3. After the required security is determined, click Next.
4. The
Security Settings page displays the required information that must be entered to connect to that particular network. For example, if an
Infrastructure WEP network is selected, WEP encryption and key index information is displayed, but only the WEP Network Key needs to be
entered. If you do not know the required network settings, contact your system administrator.
file:///C|/CX2%20Muroc%20UG/6-15-04/profiles.htm (2 of 10) [6/15/2004 3:40:11 PM]