User's Manual

Using Intel(R)PROSet/Wireless
Allows you to import and export user based profiles to and from the Profiles List. Wireless Profile can be
automatically imported into the Profiles List. See Import and Export Profiles for more information.
To export Administrator profiles refer to
Administrator Export Properties for more information.
Importing Profiles into the Profile List
Wireless profiles can be automatically imported into the Profiles List. This is accomplished by Intel
PROSet/Wireless monitoring the import folder on your hard disk for new profile files. Only profiles that have been
enabled Enable Auto-Import in
Advanced Settings can be automatically imported. If a profile of the same name
already exists in the Profiles List a dialog is displayed allowing you to either reject the imported profile, or accept it,
in which case the existing profile is replaced. All imported user based profiles are placed at the bottom of the
Profiles List, and the profile file is immediately deleted after it is the imported, whether the import was successful or
not. Refer to
Automatic Profile Distribution for more information.
Password Protected Profiles
Password protected user based profiles can be imported and exported automatically to remote systems. If a profile
is password protected, before it can be edited, the assigned password must be entered. Refer to
Set a Password
Protect for more information.
Import/Export Description
Name Description
file:///C|/CX2%20Muroc%20UG/6-15-04/assist.htm (27 of 32) [6/15/2004 3:40:07 PM]