User's Manual

Using Intel(R)PROSet/Wireless
Available Networks
The Available Networks list displays a list of wireless networks within range of the adapter. Click Connect to launch
the Profile Wizard to create a profile for the selected wireless network.
Name Description
The signal strength of the wireless network access point or computer (Ad hoc mode). The signal strength
icon bars indicate that the wireless network or computer is available for connection but is still not is associated with
an access point or computer (Ad hoc mode).
The wireless network is using Infrastructure operating mode.
The wireless network is using Ad hoc operating mode.
The wireless network is using Security encryption.
The band frequency being used by the wireless network.
Network Name
Name of the wireless network (SSID) or computer.
Configure
Connect to the selected available Network Name.
Properties
The Networks Properties displays the current network connection status for the
wireless adapter. Refer to Network Properties for information.
Refresh
Refresh the list of available networks. If any new networks are available with range
of the adapter, the list is updated to show the new network name.
Network Properties
This page displays the current connection status for the wireless adapter.
Network Connection Details dialog description
Name Description
Network Name
Displays the wireless network name.
Band
Band (Frequency): Current band and frequency being used. Displays Out of
Range if no band and frequency is displayed. Displays:
● 802.11b, 802.11g
● 802.11a
● 802.11b
● 802.11g
Operation Mode
Displays the current operating mode, Infrastructure [AP] (default) or Ad hoc.
file:///C|/CX2%20Muroc%20UG/6-15-04/assist.htm (11 of 32) [6/15/2004 3:40:06 PM]