User's Manual

Wireless Mode Specifies 5 GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps,
or 2.4 GHz 54 Mbps operation in an access point network.
Wireless Mode when
Starting Ad Hoc
Network
Specifies 5GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps,
or 2.4 GHz 54 Mbps to start an Ad Hoc network if no matching
network name is found after scanning all available modes.
Ad Hoc Mode Profile Configuration
To configure a profile in ad hoc mode, change the Network Type in the Profile
Management's Advanced tab. This table provides the Advanced tab field descriptions to
configure a profile for ad hoc mode:
Field Name Description
Network Type Ad Hoc.
802.11b Preamble Specifies the preamble setting in 802.11b. The default setting
is Short & Long, which allows both short and long headers in
the 802.11b frames. Set to Long Only to override allowing
short frames.
Transmit Power
Level
Selects 100%, 50%, 25%, 12.5%, or Lowest transmit power.
Wireless Mode Specifies 5 GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps, or
2.4 GHz 54 Mbps operation in an access point network.
Wireless Mode when
Starting Ad Hoc
Network
Specifies 5GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps, or
2.4 GHz 54 Mbps to start an Ad Hoc network if no matching
network name is found after scanning all available modes.
If Ad Hoc 2.4 GHz is selected, select the channel to start the Ad
Hoc network on from the Channel drop-down menu.
Make sure to also edit the General and Security tabs.
Access Point Mode Profile Configuration
To configure a profile in Access Point (infrastructure) mode, change the Network Type in
the Advanced tab. This table provides the Advanced tab field descriptions to configure a
profile for access point mode:
Field Name Description
Power Save Mode The power management options:
OffOff The adapter receives full power from the PC.
NormalNormal The driver turns off power to the adapter for
short periods over briefly spaced time