User's Manual

Updating the NDIS Driver
The InstallShield process includes installing the NDIS drivers for the Atheros AR5001
Wireless Network Adapter (wireless card). If a new network adapter is installed, use
the following instructions to make sure the driver is updated for the new wireless
network adapter.
WWindows XP and Windows 2000:indows XP and Windows 2000:
With no existing Atheros NDIS driver installed, insert the wireless network adapter
into a 32-bit CardBus slot. Update the NDIS driver:
1. Open the InstallShield Wizard (setup.exe).
2. Click Next to continue.
3. Click Yes to accept the License Agreement.
4. On the Setup Type page, choose Update Driver and Applications (recommended) or
Update Driver Only to update the NDIS driver. Click Next to continue.
5. Choose the destination location. Click Next to continue.
6. Choose whether to enable the Tray Icon. Click Next to continue.
7. Click Next to continue.
8. Click Finish when the InstallShield Wizard is complete.
9. After installing the network card, set up the configuration profiles.
Windows 98, Windows ME, and Windows NT:Windows 98, Windows ME, and Windows NT:
With no existing Atheros NDIS driver installed, insert the wireless network adapter
into a 32-bit CardBus slot . Update the NDIS driver:
1. Wait for the New Hardware Wizard to display.
2. Click Next to continue.
3. Choose Search for a suitable driver for my device (recommended).
4. Click Next to continue.
5. Insert the Release CD into the CD-ROM drive.
6. Choose Specify a location under Optional search locations.
7. Click Next to continue.
8. Browse to the location where the NDIS driver is located. The default folder is
D:¥ ndis¥ bin¥ production¥ ndis5, assuming D:¥ is the CD drive.
9. Click OK to continue.
10. After finding the Atheros driver installation file net5211.inf, click Next to continue.