User's Manual

2. Click OK to continue.
Country selection takes effect immediately. View the advanced status information on
the Current Status tab to verify the selected country.
The wireless network adapter has EEPROM locations allocated to store country code
information. The selections represent three regulatory domains:
- FCC (USA and Canada)
- ETSI (Europe)
- MKK (Japan)
When the country code is changed, the NDIS driver scans only the legal frequency
channels allowed in those regulatory domains.
Note that the Country Select button is only available when the card is programmed to a
single country.
Advanced Status InformationAdvanced Status Information
Click the Advanced button on the Current Status tab of the Atheros Client Utility to see
advanced information about the program and its operations. The Current Status tab
does not require any configuration.
The following table describes the items found on the Advanced Status screen.
Screen Item Description
Country The country the card is set for.
Configure the country in the country code selector, accessible
from the Action menu.
Transmit Power Level The transmit power level shows the rate in dBm.