User's Manual

2. Clear the check box Use Windows to configure my wireless network settings to
set Zero Configuration.
When this check box is cleared, all profile settings are controlled by the configuration
profile, which is set up from the Station Configuration tab of the ACU.
Security Tab
In the Atheros Client Utility, access the Security tab by clicking New or Modify on the
Profile Management tab. Click the Security tab in the Network Configuration
Settings.
Edit the fields in the Security tab of the Network Configuration Settings to configure
the profile.
Make sure to also edit the General and Advanced tabs.
Field Name Description
Pre-Shared Keys Enables the use of pre-shared keys that are defined on both
the AP and the Station. Click on Define Pre-Shared Keys
button to enter pre-shared key information.
LEAP Enables the use of LEAP for dynamic security keys. Click on
Define User Information button to enter the LEAP User Name
and Password.
Externally Managed
802.1x Keys
Sets up the station so that it uses externally provided 802.1x
authentication.
Disabled No security.
To define pre-shared encryption keys, click the Define Pre-Shared Keys button with
Pre-Shared Keys selected. Fill in the Define Pre-Shared Keys dialog.
Define Pre-Shared Encryption Keys
To define pre-shared encryption keys:
1. Click the Define Pre-Shared Keys button on the security tab.
2. Fill in the fields in the Security dialog box that opens:
Field Name Description
Key Entry Method Determines the entry method for an encryption key:
hexadecimal (0-9, A-F), or ASCII text (all keyboard characters).