User's Manual

ManualsBrandsToshiba Client Solutions ManualsElectronics802.11b WLAN Mini-PCI Module

Wireless LAN Card FeaturesWireless LAN Card Features

The Wireless LAN Card is a wireless network card that fits into a Mini-PCI TypeIII slot.

Wireless LAWireless LAN Card TypesN Card Types

The Wireless LAN Card is a wireless network card that complies with the IEEE 802.11 standard on wireless

LANs (Revision B). Revision B supports data rates up to 11 Mbit/s.

n Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. This means that your Wireless hardware will

communicate with other vendors’ IEEE 802.11 compliant wireless LAN product. The 'Wi-Fi CERTIFIED'

logo is a certification mark of the Wi-Fi Alliance.

n Fully compatible with any other wireless LAN system based on Direct Sequence Spread Spectrum (DSSS)

radio technology that complies with the “IEEE 802.11 standard on wireless LANs (Revision B).

Wireless LAN CardsWireless LAN Cards

The Wireless LAN Card supports the following wireless LAN features:

Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbit/s.

Frequency Channel Selection

Roaming over multiple channels.

Card Power Management.

Wired Equivalent Privacy (WEP) data encryption, based on 128bit encryption algorithm.

Card SpecificationsCard Specifications

Form Factor - Mini PCI TypeIII

Capability - IEEE 802.11 Standard for Wireless LANS

Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.

Network Operating - Microsoft Windows® Networking

System

Media Access Protocol - CSMA/CA (Collision Avoidance) with Acknowledgment (ACK)

Data Rate - 11/5.5/2/1 Mb/s (Revision B)

Radio CharacteristicsRadio Characteristics

Radio Characteristics of Wireless LAN Cards may vary according to:

n country/region where the product was purchased

n Type of product

Wireless communication is often subject to local radio regulations. Although Wireless LAN Wireless

networking products have been designed for operation in the license-free 2.4GHz band, local radio regulations

may impose a number of limitations to the use of wireless communication equipment.

NOTE: NOTE: Refer to the flyer "Information to the User” for regulatory information that may apply in your

country/region.

RF Frequency -Band2.4GHz (2400-2483.5 MHz)

Modulation Technique -DSSS-CCK, DSSS-DQPSK, DSSS-DBPSK

The range of the wireless signal is related to the Transmit Rate of the wireless communication.

Communications at lower Transmit range may travel larger distances.

Summary of content (9 pages)

PAGE 1
W ireless LAN Card Features The Wireless LAN Card is a wireless network card that fits into a Mini-PCI TypeIII slot. W ireless LAN LAN Card Types The Wireless LAN Card is a wireless network card that complies with the IEEE 802.11 standard on wireless LANs (Revision B). Revision B supports data rates up to 11 Mbit/s. n Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. This means that your Wireless hardware will communicate with other vendors’ IEEE 802.11 compliant wireless LAN product.
PAGE 2
n n The range of your wireless devices can be affected when the antennas are placed near metal surfaces and solid high-density materials. Range is also impacted due to “obstacles” in the signal path of the radio that may either absorb or reflect the radio signal.
PAGE 3
Regulatory Information The CISCO Aironet® 350 Series Mini-PCI (MPI350) must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
PAGE 4
This device complies with Part 15 of FCC Rules. Operation of the devices in a Wireless LAN System is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may cause undesired operation.
PAGE 5
1. Sticker Please put the following sticker on devices incorporating this product. In the frequency bandwidth of this equipment, industrial device, scientific device, medical device like microwave oven, licensed premises radio station and non-licensed specified low-power radio station for mobile object identification system (RF-ID) that is used in product line of factories,(Other Radio Stations)are used.
PAGE 6
Information sheet Wireless Interoperability The CISCO Aironet® 350 Series Mini-PCI (MPI350) products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum(DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs(Revision B), as defined and approved by the Institute of Electrical and Electronics Engineers. The Wireless Fidelity(Wi-Fi) certification as defined by the Wi-Fi Alliance.
PAGE 7
The CISCO Aironet® 350 Series Mini-PCI (MPI350) must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
PAGE 8
This device complies with Part 15 of FCC Rules. Operation of the devices in a Wireless LAN System is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may cause undesired operation.
PAGE 9
1. Sticker Please put the following sticker on devices incorporating this product. In the frequency bandwidth of this equipment, industrial device, scientific device, medical device like microwave oven, licensed premises radio station and non-licensed specified low-power radio station for mobile object identification system (RF-ID) that is used in product line of factories,(Other Radio Stations)are used.