User's Manual

29
Using the setup utility (Continued)
Setting Bluetooth

Displaying the authenticated remote devices
The Product displays the names of the destination Bluetooth devices it has already authenticated, and their
device addresses.
Choose the button in the main screen.

Setting Bluetooth
1) Select the
button in the main screen, then click the Setting tab.
2) Enter a Bluetooth device name.
You can register any unique IDs (device names) to the Product.
Enter a device name consisting of up to 248 bytes. One half-size alphanumeric character takes one byte,
while one full-size kanji/kana/katakana/alphanumeric character takes three bytes.
3) Enter a Bluetooth passkey.
Enter a passkey, consisting of up to 16 half-size alphanumeric characters, which is used to authenticate
devices.
The screen for setting Bluetooth appears.
The authenticated remote devices are displayed. You can
subsequently connect the displayed remote devices without any
passkeys. You can delete a selected remote device by clicking
the Delete button. You can delete all the remote devices by
clicking the Delete All button.