User's Manual

27
Power-up/down
•
Preparation
• Place the battery switch in the ON position.
• If you use the purchased Product for the first time or if the built-in battery contains only
insufficient charges, connect the AC adapter. (
See page 21.)
Power-up
Slide the main power switch in the arrow direction.

Starting the Product in configuration mode
It takes about five or more seconds until
appears in the LDC screen. With the main power switch slid in
the arrow direction, the Product will be started in configuration mode. In this mode, you can configure the
Product, format the hard disk, and do other things. (
See page 25.)
Attention
•
If you use the Product for the first time, set the Bluetooth passkey, Bluetooth authentication, and
the date and time using the setup utility. (
See page 25.)
Power-down
With the Product energized, slide the main power switch.
When the Product is energized, appears.