User's Manual

12
Applicable standards
For Usage in Japan
Target country and region for use
The Product meets the requirements of the radio application standard for use in Japan.
•
Note that, if you use the Product in a country or region other than Japan, you may be punished
according to an applicable law therein.
Indications on the applicable standard
•
TELEC conformity mark and authentication number
The Product has been proven to satisfy the engineering standard as a radio terminal station used for low-
power data communication according to the Telecommunications Business Law.
You may be legally punished if:
• you disassemble or modify the Product; or
• you remove the label applied on the rear side of the Product.
•
The following indication concerns the use of the 2.4 GHz frequency band, the modulation system,
supposed interference distance, and permission to change the frequency.
Meanings of the indication
[2.4]: Indicates that the radio equipment uses the 2.4 GHz frequency band.
[FH]: Indicates that the Product uses the FH-SS modulation system.
[1]: Indicates that the supposed interference distance is 10 or fewer meters.
[ ]: Indicates that the Product uses the entire band of 2,400 MHz to 2,483.5 MHz, and cannot ward
off the band for the movement identification device.
R
Authentication number
2.4FH1