User's Manual

Toshiba Wireless LAN mini-PCI Card – Getting started
Basic Settings for Peer-to-Peer Workgroups
If you wish to connect to a Peer-to-Peer workgroup, use the Add/Edit Configuration Profile
window to:
n Click the start button from the Windows task bar.
n Click on Settings, and then on Control Panel.
n In the Control Panel window, double-click the Wireless nNetwork icon.
n Select to connect to a Peer-to-Peer Workgroup.
n Set the correct Network Name and Encryption Key.
Figure 1-5 Edit Configuration window : Peer-to-Peer
1. In the field Network Name define the name of the wireless network to which you want
to connect.
The Network Name can be any alphanumeric string in the range of “a” to “z”, “A” to
“Z” and “0” to “9” with a maximum of 32 characters (case-sensitive).
n If there is already a Peer-to-Peer group with this name available your computer will
automatically connect to this workgroup.
n If there is not yet such a group available, your computer will automatically start one
with this name.
2. Click OK to confirm and return to the Add/Edit Configuration Profile window.
3. Click OK again to finish.