User Manual

51
6. Replace the additional memory cover and fasten the screws that you removed in
step 4.
Make sure that the additional memory cover is firmly closed.
7. Replace the battery pack.
When you turn on your computer, the total memory capacity is automatically recognized. Check
if the total memory capacity is correct.
REFERENCE: For checking the memory capacity, see “Checking the memory capacity” to be
described later in this section.
Removing
1. Save your data, shut down Windows, and turn off your computer.
2. Remove the AC adapter and cables from your computer.
3. Turn your computer up side down and remove the battery pack.
REFERENCE: For more information on the battery pack, see “1-3 Replacing the battery
pack” in Chapter 4.
4. Remove the screw from the additional memory cover and remove the cover.
5. Use a pen to push open the left and right hooks securing the additional memory
card and remove the card from your computer.
Pull out the additional memory card that is diagonally raised.