User Manual

7. PC CARDS

The PC card slot of your computer can accommodate the Type II PC card (including the

CardBus-compliant card).

For more information on use of the PC card, see the manual that comes with your PC card.

TIP: • While the hard disk or CD-ROM of the PC card connection type is in operation, an

attempt to initiate communications or play back sounds may cause the following

phenomena:

- Decrease in the communication speed, disconnection of the communication line,

dialing failure

- Sound skips during playback

Notes on Insertion and Removal

Caution

- When using a PC card that does not support hot insertion, be sure to

turn off your computer before inserting or removing the PC card.

- Some PC cards may accumulate heat over long-time use. If the PC card

is hot, leave it for a while to let it cool down before removing it.

- Be sure to disable the PC card before removal. Removing the PC card

without disabling it may a fatal system error.

Inserting

1. If cable connection is required, connect a cable to the PC card.

2. Check the orientation of the card and insert it into the slot.

Gently push the card all the way to the end without applying excessive force. If the PC card

is not inserted all the way to the end, you may not be able to use the card or the card may be

damaged.

REFERENCE: For more information on PC card connection and setup, see the manual that

comes with your PC card.