User Manual

29
3. Click to select a region name or a location name.
If a region name is selected, new region information will be created after the region setup
for the modem and new location information will be used as the current location
information.
If a location name is selected, the region specified in its location information will be used
for the region setup for the modem and the selected location information will be used as the
current location information.
Other Settings
1. Right-click the [Internal Modem Region Select Utility] icon ( ) on the Notification
area and select an option from the menu.
•
Settings
Click the check box to change the following settings:
Automatic start mode “Internal Modem Region Select Utility”
automatically starts at the system start-up and
the region setting is made for the modem.
Automatically display dial properties after
region selection.
The [Phone and Modem Options] window
appears after region selection.
Select a region from the location setting The location name specified in the [Phone and
Modem Options] window appears in the sub-
menu of the region name. You can now select a
region using its location name.
Display a dialog if the region code of the
current location setting is inconsistent
between the modem and the telephony.
If the region setting of the modem is different
from the region code of the current location
setting specified on the [Phone and Modem
Options] window, a message dialog appears.
•
Modem selection
The window for selecting the COM port number appears. When using the internal modem, no
change is required as the COM port number is automatically set.
•
Dial properties
The [Phone and Modem Options] window appears.