Instruction Manual

www.toseesecurity.com.au
1. Click “Sign Up”and read the Privacy Policy after
it pops up. Click “Agree” and enter the registeration page.
2.
You use your email address as your account to register. The
country/region of the APP will be the same as the phone's. You
cannot change the country/region after the registeration. Enter
email address and click”Get Verification Code”；
3.
Enter the verification code and continue to the password setting
page. Set your password as required and click “Done”.
Works with the Smart Life APP
APP Available at:
Download Smart Life app
Adding
the Door
Lock
1.
Tap "Add Device" on the Home page or + in the upper right corner of the page
to go to the Add Device page.
2. On the door lock now press * then # and enter the administrator pass code,
then press “1” to enter into the admin settings, then press “ 4 ” to configure the
network.
3. Press “1” for smart mode to commence Wi-Fi pairing. A countdown starts.
4. Now select "Security and Video Survallence" then choose "Lock (Wi-Fi)
5. Select the 2.4GHz Wi-Fi network and enter the networks password.
6. The app will now search and connect, if successful the new device will
appear.The keypad numbers from 1 to 4 will light also light up and you will hear a
voice prompt "successful".
7. If the door lock does not connect to the mobile device app, make sure you are
connected to the Wi-Fi and recieving good signal.
Register
Using the Smart Life APP