WARDEN - OPERATING INSTRUCTIONS www.toseesecurity.com.
Operating Instructions Key Controls Key Function of the key 2 ↑ UP 8 ↓ DOWN * EXIT; # ENTER Settings System Initialization Press”*”then“#” Enter Enter 123456 # to enter the menu menu Display:”succeed” initialization is complete Enter admin information Choose“1”Admin Setting” Press”#” confirm Press”#” confirm It is important you set an administrator to start setting the door lock functions, it is suggested that as the administrator you set both fingerprint and key code. www.toseesecurity.
User Management www.toseesecurity.com.
Download Smart Life app Works with the Smart Life APP APP Available at: Register 1. Click “Sign Up”and read the Privacy Policy after it pops up. Click “Agree” and enter the registeration page. 2. You use your email address as your account to register. The country/region of the APP will be the same as the phone's. You cannot change the country/region after the registeration. Enter email address and click”Get Verification Code”； 3. Enter the verification code and continue to the password setting page.
Remote Dynamic Unlock, Temporary Password and Remote Unlock Remote Dynamic Password Slide Page 1. Click on the APP homepage to enter the corresponding door lock page 2. Slide the door lock interface page to the remote dynamic password screen, click on the icon and it will produce password valid for 5 minutes. www.toseesecurity.com.
Temporary Password 1. Click the temporary password button on the APP device interface, add, delete, modify, click OK, and wait for the distribution until the APP prompts that it has been issued 2. Create random or produce your own code, name the code, set the time settings for the password to remain active. Effect of Time is when the password becomes active, The Failure Time is when the password is no longer active. Remote Unlock 1. Click on the APP homepage to enter the corresponding door lock page 2.
Alarm Automatically reports after an alarm occurs. The report types include: tamperproof alarm, low-voltage alarm, normally open alarm, and freeze when the number of verification errors are exceeded User Assignment 1. Click on users. 2. Click "+" on the top right hand corner. 3. Click on others - "Immediatley add". 4. Assign a name to the user. 5. Press "+" on the form of entry to be allocated or tracked. (Fingerprint, Password or Door Card) 6.
Electronic Locking Button When you push the button to the "red" status, the lock will be in a "Locked" status and it can be only opened from outside by Master Admin . To disable this function, you need push the button to "green" status, to release the "Locked" status. Locked Becareful as no user will be able to will be able to unlock Unlock apart from the admin user, always leave a spare mechanical key hidden outside for emergency. General Notes 1.
FAQ 1) How to read operation records? In the Records of the main interface. 2) Why can’t I unlock it after open the passage mode You need to perform an unlock verification in any 3) What is the purpose of Auto Lock You can set how long to lock after unlocking 5）After installation, touch sensing a) In this case, first check that the positive and negative keyboard, screen no respond method, than the passage mode will take effect.
