WARDEN 1 - INSTALLATION INSTRUCTIONS www.toseesecurity.com.
Installation Adjusting the handle direction Notice: Adjust the handle according to the direction you open the door. www.toseesecurity.com.
Step 1 Install Mortise Step 2 Install Sliding Screw Casing 1.The screw casing place is adjustable from 55mm to 100mm far from the square shaft. Depending on the location of the hole-drilling or the old door hole. 2.The arrow is always pointing down Step 3 Install Back Panel and link wire Step 4 Install fixing screws Step 5 installation complete A installation template in included with every WARDEN 1 www.toseesecurity.com.
