User Instructions

20
Geschäftsführung: Thomas Lippok & Jens Wiegand • Aufsichtsratsvorsitzender: Joseph Vorih
Sitz der Gesellschaft: Darmstadt • Als Gesellschaft mit beschränkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147
Unser Unternehmen ist bei der Stiftung Elektro-Altgeräte Register (EAR) unter der Nummer WEEE-Reg.-Nr. DE66485129 registriert.
CONFIDENTIAL - EXTERNAL
25 Screw terminal RF-voltage Output
Shows power of the received RF signal and should be >3,4V
26 Screw terminal earthing (GND)
Ground connection of the telemetry system
27 Stator connection
Connector for stator connection
28 Mode switch output signal
Chooses the form of the output signal, that will be handed out on BNC
connector “4”
Analog: Analog voltage output ±10V
Frequency: Frequency output 10kHz±5kHz, Voltage with TTL-level
29 Filter switch
Switch for selecting the signal bandwidth.
30 Mode switch measuring mode for the analog output
With this switch you can adjust the offset of the analog output (Potentiometer
Nr.5)
Measure: Normal operating mode. Signal output (connector No. 4) shows the
zero point and by Potentiometer No.5 affected analog output signal.
Offset:
In this position the current zero point displacement of Potentiometer No.5 is
shown
31 Cal – function
Switch for activating the defined bridge detuning “Shunt Cal”. The LED lights for
approx. 5sec after activation of the switch. After 5sec the measuring system
returns self-dependent to operational mode.