User Instructions
Table Of Contents
- 1 Safety Instructions
- 2 Markings used
- 3 Application
- 4 Structure and mode of operation
- 5 Mechanical installation
- 5.1 Important precautions during installation
- 5.2 Conditions on site
- 5.3 Installation orientation
- 5.4 Installation
- 5.5 Preparing for the rotor mounting (exemplary)
- 5.6 Mounting the rotor
- 5.7 Installing the telemetry system
- 5.7.1 Measuring setup
- 5.7.2 Instruction for installation
- 5.7.3 Calibration signal
- 5.7.4 Stator antenna
- 5.7.5 Evaluation unit
- 6 Electrical connection
- 7 Shunt signal
- 7 Functional testing
- 8 Maintenance
- 9 Dimensions of the stator antenna
- 10 Dimensions of the rotor antenna
- 11 Specifications
19
Geschäftsführung: Thomas Lippok & Jens Wiegand • Aufsichtsratsvorsitzender: Joseph Vorih
Sitz der Gesellschaft: Darmstadt • Als Gesellschaft mit beschränkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147
Unser Unternehmen ist bei der Stiftung Elektro-Altgeräte Register (EAR) unter der Nummer WEEE-Reg.-Nr. DE66485129 registriert.
CONFIDENTIAL - EXTERNAL
Channel: 2
Fig 5.11: Functions of the control unit front side
17 Display
Information of Voltage or Current output. The display is only for monitoring
purposes, but doesn’t provide the accuracy of an measuring device.
18 Power on
The LED signalizes the ON / OFF status of the device
19 RF Level
The LED shows a sufficient signal level for data transmission from rotor to
stator.
20 Signal output
Analog output signal (±10V) or Frequency output (10±5kHz) with TTL level
21 Offset
Potentiometer to adjust the Offset between ±1V. This function only effects the
voltage output, not the frequency output.
22 Main Switch
ON / OFF switch
23 Screw terminal Power connection (+)
9 VDC … 36 VDC
24 Screw terminal Power connection (-)
9 VDC … 36 VDC