User Instructions
Table Of Contents
- 1 Safety Instructions
- 2 Markings used
- 3 Application
- 4 Structure and mode of operation
- 5 Mechanical installation
- 5.1 Important precautions during installation
- 5.2 Conditions on site
- 5.3 Installation orientation
- 5.4 Installation
- 5.5 Preparing for the rotor mounting (exemplary)
- 5.6 Mounting the rotor
- 5.7 Installing the telemetry system
- 5.7.1 Measuring setup
- 5.7.2 Instruction for installation
- 5.7.3 Calibration signal
- 5.7.4 Stator antenna
- 5.7.5 Evaluation unit
- 6 Electrical connection
- 7 Shunt signal
- 7 Functional testing
- 8 Maintenance
- 9 Dimensions of the stator antenna
- 10 Dimensions of the rotor antenna
- 11 Specifications
15
Geschäftsführung: Thomas Lippok & Jens Wiegand • Aufsichtsratsvorsitzender: Joseph Vorih
Sitz der Gesellschaft: Darmstadt • Als Gesellschaft mit beschränkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147
Unser Unternehmen ist bei der Stiftung Elektro-Altgeräte Register (EAR) unter der Nummer WEEE-Reg.-Nr. DE66485129 registriert.
CONFIDENTIAL - EXTERNAL
5.7.5 Evaluation unit
Channel: 2 Channel: 1
Fig 5.9: Control units
Technical details
Supply voltage
9…36 VDC
Max. power consumption
30 VA
Signal bandwidth
Switchable 1000 Hz / 100Hz
Voltage output
±10 V
Frequency output
5 … 15 kHz
Signal-to-noise ratio
63dB (1000Hz) / 83dB (100Hz)
Signal transit time
450µs
Wireless shunt calibration
Key button at control unit
Protection class
IP40
Weight
approx.. 700 gramm
Temperature range
-10 … +70 °C
Carrier frequency amplifier channel 1
10,7MHz
Carrier frequency amplifier channel 2
13,56MHz
Power supply frequency channel 1/2
13-28kHz