User Instructions
Table Of Contents
- 1 Safety Instructions
- 2 Markings used
- 3 Application
- 4 Structure and mode of operation
- 5 Mechanical installation
- 5.1 Important precautions during installation
- 5.2 Conditions on site
- 5.3 Installation orientation
- 5.4 Installation
- 5.5 Preparing for the rotor mounting (exemplary)
- 5.6 Mounting the rotor
- 5.7 Installing the telemetry system
- 5.7.1 Measuring setup
- 5.7.2 Instruction for installation
- 5.7.3 Calibration signal
- 5.7.4 Stator antenna
- 5.7.5 Evaluation unit
- 6 Electrical connection
- 7 Shunt signal
- 7 Functional testing
- 8 Maintenance
- 9 Dimensions of the stator antenna
- 10 Dimensions of the rotor antenna
- 11 Specifications
7
Geschäftsführung: Thomas Lippok & Jens Wiegand • Aufsichtsratsvorsitzender: Joseph Vorih
Sitz der Gesellschaft: Darmstadt • Als Gesellschaft mit beschränkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147
Unser Unternehmen ist bei der Stiftung Elektro-Altgeräte Register (EAR) unter der Nummer WEEE-Reg.-Nr. DE66485129 registriert.
CONFIDENTIAL - EXTERNAL
5.4 Installation
Please mount the rotor & stator simultaneous to its final position, so that you
don’t need to separate the stator winding. The stator antenna should only be
separated in case of an emergency.
For dismounting instructions please contact the responsible HBM sales
engineer.
5.5 Preparing for the rotor mounting (exemplary)
CAUTION
The rotor is very heavy (approx. 370kg)!
Use a crane or other suitable lifting equipment to lift it out of its packaging and
install it.
Use flexible eye bolts as transport and mounting aids. Hook the lifting
equipment to these eye bolts as this ensures that the rotor is lifted
horizontally out of the packaging (see Fig 4.1).
Transport and mounting eye bolts
Fig 5.1: Transport and mounting eye bolts on the rotor