operation manual

48 49
DeutschEnglish DeutschEnglish
Negative and positive terminals
Negativeandpositiveterminalsareavailableasclampingandscrewconnection.
They are directly interconnected, having the same function.
Ventilation
Ventilation automatically prevents any excess pressure within hermetically sealed
housing. It is equipped with a hydrophobic membrane.
4. Startup
• Voltages of up to 60 V may occur on contacts. Avoid contact with
hands.
• Secure Power 26-104 against slipping and tilting. Only mount battery
in a horizontal position, grips directed upwards.
• Absolutely avoid wearing metallic jewelry when working on or staying
beside batteries. Do not place metallic tools on batteries either as this
may induce court-circuits. Only use insulated tools.
• TheTorqeedoPower26-104canonlybestackedforstorage,itmust
not be stacked in operation.
Ventilation
•Duringhandlingandcleaningmakesureyoudonotdamage
ventilation.
•Donotcoverventilation.
•Incaseofdamage,pleasecontactTorqeedoserviceimmediately.
4.1 How to switch on/off the Power 26-104
Turning on:
For operation with the Cruise outboard motor: To switch on the Power 26-104, shortly
pressON/OFFswitchonremotethrottleortillerdisplay.
Usage with other devices: Turning on with on/off-switch for Power 26-104.
Keep button pressed until its red LED lamp lights up for a few seconds – this is the signal
indicating that the battery is operative.
Switching on may take up to two seconds to prevent accidental switching on.
Switching off:
Power 26 -104 will switch off automatically within 48 hours after use (charging or
discharging). This will minimize the battery’s self-discharge and the risk of harmful deep
discharge.
Switching the battery off manually during operation with the Cruise Motor:
Switching the battery off manually with the ON-OFF switch:
Turning off with on/off-switch for Power 26-104: Keep button pressed for at least five
seconds. A brief flash of LED indicates that the battery is switched off.
OFF
Switch off the motor and
battery(ies): In order to also
switch off the battery, keep
theON/OFFbuttononthe
remote throttle or tiller display
pressed for 5 seconds until
„Off“ icon is displayed.
Switching off only the
motor: To switch off the
motor,pressON/OFF
switch until blackscreen
of the display: motor is
switched off, batteries
still run.