operation manual
Table Of Contents
- 1 Einleitung
- 2 Geräteregistrierung
- 3 Ausstattung und Bedienelemente
- 4 Technische Daten
- 5 Sicherheit
- 6 Inbetriebnahme
- 7 Betrieb
- 8 Demontage des Antriebs
- 9 Trailern/Slippen des Bootes
- 10 Fehlermeldungen
- 11 Pflege und Service
- 12 Allgemeine Garantiebedingungen
- 13 Zubehör
- 14 Entsorgung und Umwelt
- 15 EG-Konformitätserklärung
- 16 Urheberrecht
- 1 Introduction
- 2 Registering the device
- 3 Equipment and controls
- 4 Technical data
- 5 Safety
- 6 Start-up
- 7 Operation
- 8 Disassembling the drive
- 9 Towing/slipping the boat
- 10 Error messages
- 11 Care and service
- 12 General conditions of warranty
- 13 Accessories
- 14 Disposal and environment
- 15 EC Declaration of Conformity
- 16 Copyright
Disassembling the drive
EN DE
8 Disassembling the drive
1
Fig. 62: Locking pin
1
Locking pin
1. Move the tiller to the neutral position and remove the magnetic kill switch from
the tiller.
2. Switch off the motor.
3. Remove the locking pin (1).
3
2
5
4
Fig. 63: Electrical connections
2
Tiller cable
4
Motor cables
3
Tiller cable connection
5
Motor cable connector
4. Disconnect all electric connections (2, 4) between tiller, battery and motor.
page 89 / 112