operation manual

Operation
DE EN
7.2.3 Steering
1. Operate the tiller handle as follows:
■
Tilt the tiller to starboard.
The boat turns left.
■
Tilt the tiller to port.
The boat turns right.
■
Hold the tiller straight.
The boat moves straight forwards.
7.2.4 Ending the trip
Switching the motor off
Fig. 57: Magnetic kill switch
1. Move the tiller to the neutral position.
2. Push and hold the On/Off button for three seconds.
3. Remove the magnetic kill switch.
You can switch the motor off in any operating state. The Travel system switches off
automatically when inactive.
Proceed as follows after every use:
■
Take the motor out of the water.
■
In salt water or brackish water: Rinse the motor in fresh water.
7.3 Tilting the motor
CAUTION!
Danger of crushing if motor tilts.
Slight or moderately severe physical injuries may result.
■
When tilting the motor, ensure that no-one is present in the vicinity of the
motor.
■
Do not reach into the mechanical parts when tilting the motor.
Grounding protection
ADVICE
The auto kick-up setting protects the motor in the event of grounding. It pro-
vides no guarantee that potential grounding will not cause damage to the pro-
peller or even the motor. This applies particularly in the event of grounding on
stones or rock.
page 86 / 112