operation manual

Operation
EN DE
7.2 Travel mode
7.2.1 Starting a trip
ADVICE
■
If there is visible damage to components or cables, the Travel system must
not be switched on.
■
Ensure that all people on board wear a life jacket.
■
Before starting, attach the lanyard of the Emergency Stop to the skipper’s
wrist or life jacket.
■
The state of charge of the battery must be checked at intervals while on the
move.
ADVICE
During breaks in a trip, if there are swimmers near the boat while at anchor:
remove the magnetic kill switch in order to avoid unintentionally starting the
Travel system.
1.
1
Fig. 54: On/Off button
2.
Fig. 55: Magnetic kill switch
Starting the motor
1. Switch the motor on by pressing the On/Off button (1) for one second.
2. Place the magnetic kill switch on the tiller.
7.2.2 Forward/reverse motion
Fig. 56: Tiller
1. Operate the tiller handle as follows:
■
Turn the tiller handle to the right.
Forward drive
■
Turn the tiller handle to neutral position.
Neutral position
■
Turn the tiller handle to the left.
Motion reverse
page 85 / 112