operation manual
Table Of Contents
- 1 Einleitung
- 2 Geräteregistrierung
- 3 Ausstattung und Bedienelemente
- 4 Technische Daten
- 5 Sicherheit
- 6 Inbetriebnahme
- 7 Betrieb
- 8 Demontage des Antriebs
- 9 Trailern/Slippen des Bootes
- 10 Fehlermeldungen
- 11 Pflege und Service
- 12 Allgemeine Garantiebedingungen
- 13 Zubehör
- 14 Entsorgung und Umwelt
- 15 EG-Konformitätserklärung
- 16 Urheberrecht
- 1 Introduction
- 2 Registering the device
- 3 Equipment and controls
- 4 Technical data
- 5 Safety
- 6 Start-up
- 7 Operation
- 8 Disassembling the drive
- 9 Towing/slipping the boat
- 10 Error messages
- 11 Care and service
- 12 General conditions of warranty
- 13 Accessories
- 14 Disposal and environment
- 15 EC Declaration of Conformity
- 16 Copyright
Start-up
EN DE
Locking the battery
6
Fig. 45: Locking pin
6
Locking pin
1. Push the locking pin (6) in to fix the battery in place (4).
2. Check that the battery (4) and tiller (3) are securely fitted.
Cable connections
ADVICE
■
Do not use excessive force when plugging in the cables, since this may bend
the pins.
■
The union nut on the plugs must be put on straight in order to prevent dam-
age to the thread during tightening.
8
7
10
9
Fig. 46: Electrical connections
7
Tiller cable
9
Motor cables
8
Tiller cable connection
10
Motor cable connector
page 75 / 112