operation manual
Table Of Contents
- 1 Einleitung
- 2 Geräteregistrierung
- 3 Ausstattung und Bedienelemente
- 4 Technische Daten
- 5 Sicherheit
- 6 Inbetriebnahme
- 7 Betrieb
- 8 Demontage des Antriebs
- 9 Trailern/Slippen des Bootes
- 10 Fehlermeldungen
- 11 Pflege und Service
- 12 Allgemeine Garantiebedingungen
- 13 Zubehör
- 14 Entsorgung und Umwelt
- 15 EG-Konformitätserklärung
- 16 Urheberrecht
- 1 Introduction
- 2 Registering the device
- 3 Equipment and controls
- 4 Technical data
- 5 Safety
- 6 Start-up
- 7 Operation
- 8 Disassembling the drive
- 9 Towing/slipping the boat
- 10 Error messages
- 11 Care and service
- 12 General conditions of warranty
- 13 Accessories
- 14 Disposal and environment
- 15 EC Declaration of Conformity
- 16 Copyright
Start-up
DE EN
Tiller installation
3
2
Fig. 43: Tiller installation
2
Inner recess
3
Tiller
1. Place the tiller (3) into the inner recess (2) from above.
2. Fold the tiller (3) down until it is in a fixed horizontal position.
3. Check that the tiller (3) is inserted completely up to the stop.
Battery installation
4
5
Fig. 44: Battery installation
4
Battery
5
Outer recess
1. Place the battery (4) into the outer recess (5) from above.
2. Fold the battery (4) down until it is in a fixed horizontal position.
3. Check that the battery (4) is inserted completely up to the stop.
ADVICE
The cables must not be crushed, crimped or damaged.
page 74 / 112