operation manual
Table Of Contents
- 1 Einleitung
- 2 Geräteregistrierung
- 3 Ausstattung und Bedienelemente
- 4 Technische Daten
- 5 Sicherheit
- 6 Inbetriebnahme
- 7 Betrieb
- 8 Demontage des Antriebs
- 9 Trailern/Slippen des Bootes
- 10 Fehlermeldungen
- 11 Pflege und Service
- 12 Allgemeine Garantiebedingungen
- 13 Zubehör
- 14 Entsorgung und Umwelt
- 15 EG-Konformitätserklärung
- 16 Urheberrecht
- 1 Introduction
- 2 Registering the device
- 3 Equipment and controls
- 4 Technical data
- 5 Safety
- 6 Start-up
- 7 Operation
- 8 Disassembling the drive
- 9 Towing/slipping the boat
- 10 Error messages
- 11 Care and service
- 12 General conditions of warranty
- 13 Accessories
- 14 Disposal and environment
- 15 EC Declaration of Conformity
- 16 Copyright
Care and service
DE EN
11.4 Replacing the 503 S/L, 1003 S/L and
1003 CS/CL fin
ADVICE
Only the fins of the 503 S/L, 1003 S/L and 1003 CS/CL can be replaced.
The 1103 CS/CL fin is made of aluminium and fixed to the motor pylon. It cannot
be replaced.
2
1
Fig. 69: Fin
1
Fin
2
Screw
1. Release the screws (2) on the fin (1).
2. Remove the fin (1).
3. Insert the new fin (1).
4. Fasten the fin (1) using two screws (2).
page 100 / 112