User's Manual

3
Smart Pod Feature Overview
1. Antenna
2. EC·XTRA Timer Connector
The Smart Pod is connected securely to the EC·XTRA timer
by inserting the connector plug into the special receiver port,
located on the right (facing) side of the timer housing.
3. Enter Button
Pressing the Enter button transfers the watering schedule,
downloaded to the Smart Pod from the Scheduling Advisor
TM
PC program, to the ECXTRA timer. In addition, the sensor
bypass mode is toggled On and O with the Enter button.
4. LED Indicators
All Weather Sensor system functions and status conditions
are identiable through various operating combinations of the
red
and green indicators.
Note: See the
Smart Pod Indicator Reference Table provided on
page 12 for detailed information.
5. USB Cable – The provided USB cable is used to transfer the
custom watering schedule, created in the Scheduling Advisor
TM
PC program, to the Smart Pod.
1
2
5
4
3
To Computer
USB Port
Weather Sensor Doc Rev A.indd 3 12/23/10 3:44 PM