Quick Start Manual

ECXTRA Scheduling Advisor
TM
Installation and Use
Minimum PC System Requirements
*Windows
®
98, SE, 2000 or XP operating system,
one USB Port, CD-R drive, 800 MHz Intel
®
(or equivalent) processor, 64 MB RAM, 40 MB
available hard disk space, 1024 X 768, 16-bit color
monitor.
1. Launch Windows.
2. Place the provided ECXTRA CD into the
CD-R drive. Windows will automatically launch
the installation setup. Follow the on-screen
instructions to complete installation.
Note: If the installation setup does not launch
automatically, choose
RUN from the Start
menu. Type
d:/setup (d:/ is the CD drive
location) into the text field and click
OK.
Follow the on-screen instructions to complete
installation.
3. Once the software is properly installed, click
the ECXTRA icon located in C:/Program Files/
ECXTRA/ to launch the application.
4. Follow the step-by-step programming setup
procedures provided by the Scheduling Advisor.
Enter the required data into all the text fields as
prompted.
5. To transfer the programming data from the PC
to the ECXTRA timer, plug the Time Pod
TM
into
the computer’s USB port when instructed.
6. After successful data transfer, unplug the
Time Pod and carefully connect it to your
ECXTRA timer.
Note: Refer to pages 4 and 5 of the ECXTRA
User’s Guide for the location of the Time Pod
connection port.
7. Verify that the ECXTRA timer is set to
RUN,
then press the Time Pod button to initiate the
data transfer. The ECXTRA display will prompt
DONE when the procedure is completed.
Note: Any setup, programming or operational
changes made at the ECXTRA timer cannot be
transferred or uploaded to the PC via the Time
Pod device or connection port.
*Windows
®
is a registered trademark of Microsoft Corporation in the
United States and other countries. Intel
®
is a registered trademark of
Intel Corporation in the United States or other countries.
8